FOSTERWHEELER PMC OPPORTUNITY

...


Foster Wheeler is engaged in a major PMC for the KUWAIT National

Petroleum Company (KNPC) and is recruiting internationally for

Professional Engineers and designers for various disciplines in KUWAIT

Japan, the Netherlands and the United Arab Emirates (UAE), including:



·         
CIVILS

·         
COMMERCIAL

Ambarella Announces IP Security Camera SoCs

...
Business Wire: Ambarella introduces S2L, a family of Full HD camera SoCs for consumer, small business and professional IP-camera security applications. The S2L’s Smart-AVCTM H.264 low bitrate streaming technology reduces network bandwidth requirements, lowers cloud storage costs and supports the use of multiple cameras in home environments. Its flexible ARM Cortex-A9 CPU provides the performance required for intelligent video analytics such as intrusion detection, or audio analytics such as breaking glass detection. Additionally, the S2L dewarper can correct images captured from wide angle lenses to enable cameras that cover a wide viewing area.

"The S2L family brings advanced professional features to mainstream and consumer IP cameras, including Full HD video, High Dynamic Range (HDR) image processing, advanced analytics and wide angle viewing," said Chris Day, VP of Marketing and Business Development at Ambarella. "Designed in an advanced 28nm process, S2L enables a new generation of intelligent, ultra-low power and small form factor IP cameras with outstanding video quality."

The S2L family includes a series of software-compatible SoCs that range from 720p30 up to 1080p60 H.264 video and up to 5 MP resolution. The S2L chips feature multi-exposure HDR and Motion Compensated Temporal Filtering (MCTF) noise reduction. Power consumption for 1080p30 encoding is under 500mW including DRAM.

10:31 AM

Do You Want CNN or ESPN With That Burger?

...

Eating out is something that lots of Americans do, and watching TV is something else that lots of Americans do.  But increasingly these days, if you choose to eat in a restaurant, you are more or less obliged to watch TV too. And in my opinion, that is an obligation which deserves more public discussion and consideration than it has received up to now.

In the last few years, a number of factors have combined to lead to the proliferation of TVs in dining establishments of increasingly mainstream and even upscale reputation.  I think the first place I noticed them in was a McDonald's in a small Texas town we were driving through, six or eight years ago.  This was when flat-screen TVs were fairly new. The mounting of such a TV on the wall is a simple operation, which is probably one technical reason they are spreading in public places so fast.  (Try screwing an old-fashioned forty-pound non-flat-screen TV to the wall with only three bolts and see how long it stays up.)  Few people go to McDonald's with the express purpose of having deep, meaningful conversations.  At the time, I didn't much mind losing whatever solitude might otherwise have been available, and being subjected to MTV while I consumed my hamburger as fast as I could before going to the next thing, which is often the way people eat at fast-food places anyway.

But the next significant video intrusion into my dining-out experience was at the Luby's we go to every Friday night.  For those readers who are not Texans, I should explain that Luby's is a cafeteria chain that caters to older Southerners for whom cafeteria dining is a positive pleasure, and not a grim necessity you have to bear up under because you're stuck in a corporate office, or a hospital, or a prison, where there isn't anything better.  I'm not personally old enough to favor Luby's over a restaurant where they actually bring the food to your table, but my wife's father lives with us, and it's his favorite place in the world to eat out, so that's where we typically go.

About a year or two ago, I was dismayed to arrive in their large dining area only to find that a large clock on the wall had been replaced by a good-sized flat-screen TV.  Not only that, but there were similar TVs on all four walls, so that no matter where you sat, there was one in your field of vision.  Two were kept tuned to one of the ESPN channels, and two more to CNN.  The sound wasn't loud enough to overpower average conversation, but it didn't need to be:  closed captioning took care of that.

I don't know if you've tried ignoring a TV in your field of view, but it's not easy.  Advertisers know that the brightly colored moving images on the screen attract the eye by appealing to the part of the brain we have in common with lizards and other lower animals.  It takes constant concentration in order to avoid falling almost unconsciously into the mode of gazing unthinkingly at the screen, even if your wife or your father-in-law is talking to you.  And that can lead to other problems.

The journalist and Christian apologist G. K. Chesterton had something to say about a similar trend, though he was writing in the 1920s.  Apparently, there was a post-World-War-I fad in England of hiring a band to play at the larger restaurants.  In a column entitled "On Pleasure-seeking" he said "The fashion of having very loud music during meals in restaurants and hotels seems to me a perfect example of this chaotic attempt to have everything at once and do everything at once."  The phrase "multitasking" had not been invented yet, but that is exactly what Chesterton is talking about.

Restaurant owners don't spend money without a reason, and there must be some felt or perceived need on the part of their customers, that the restaurateurs are satisfying by putting up TVs everywhere.  One food blog I read on the topic commented that it's mainly the younger people who are driving this trend, but most of the younger people I see in Luby's are there by compulsion, not choice, taking their mothers out on Mother's Day or some such thing.  Maybe the TVs showed up because of a command from the Luby's headquarters in Houston inspired by fear that if Luby's doesn't follow the trend, they'll be left behind and eventually shunned like a restaurant would be today if it refused to install electric lights. 

Or maybe it's just a much later stage in the casualization of public culture that has been going on ever since the 1960s.  I have a confession to make.  I may be part of the generation that caused the problem.

The first TV my family ever owned was a big, heavy RCA unit that was deeper than it was wide or tall.  It sat in the living room where my dad planted it when he brought it home, and it stayed put until the day its picture tube died, which back then was like having the transmission go out on your car—time for a new one.  The new TV, which was much slimmer, came with a gold-plated steel cart on wheels and its own rabbit ears, which meant it wasn't tied to the place where the antenna wires came through the wall from the roof.  And one of the first things my father did with it was to roll it into the kitchen so we could watch TV at mealtimes, possibly even suppertime.  That was in 1962.

Half a century later, everybody dresses like they've just gotten out of bed, and they go out to eat and watch TV while they eat, just like do at home.  As ethical matters go, this is definitely small beer, but if this trend continues, it will do its part to further erode the dying art of conversation in congenial settings.

Sources:  The Chesterton quotation is from his Generally Speaking (London:  Methuen & Co., 1928), p. 141.  I referred to the Wikipedia article on Luby's Restaurants, and found a number of food blogs on the topic of TVs in restaurants.  The most vivid one has a URL that I can't repeat here verbatim because this is a family blog, but you can figure it out: http://blogs.riverfronttimes.com/gutcheck/2011/12/restaurants_mind_your_f***ing_televisions.php.

Pixpolar Patent Case Study

...
Aalto University published a presentation by Artto Aurola, Pixpolar founder, on patent considerations and lessons from his startup company's history:


Regarding the Kodak image sensor-related patents mentioned in the presentation, most part of them was acquired by Omnivision.
11:37 AM

Aptina Proposes Backside PD

...
Aptina's patent application US20140077062 "Back side illuminated image sensors with back side charge storage" by Jaroslav Hynecek describes an unusual pixel idea - move the PD implant to the backside:


The advantages of such an approach are not clear to me, but it's a fresh idea and can work, if pixel is not too small and one can spare 10-20V to control the transfer gate Vtx.
7:42 AM

Altasens Announces 4K Products

...
PR Newswire: AltaSens introduces its first commercially available 4K sensor: the AL41410C. The Super-35 size image sensor delivers 4K cinema frames in either 12-bit or 10-bit resolution at up to 72fps using 1.3W power. A 5.2-μm pixel pitch gives the AL41410C its high sensitivity, as well as low noise and extensive compatibility with the available optics usually reserved for leading DSLR cameras.

"This sensor delivers crisp, high frame rate imaging through 4K and beyond," explained Lester Kozlowski, the company founder and CEO. Darren Paulson, VP of Business Development and Compliance, added, "The sensor's expansive programmability, including extremely fast frame rates at multiple optical formats, enables the next generation of broadcast through scientific, military and consumer digital cameras."

The ability to read a 4096 x 2160 format at up to 72 fps makes AL41410C an extremely attractive sensor for producing 4K cinema in the latest UHD cameras. Operating the sensor at a 3840 x 2160 resolution up to 72 fps is ideal for Ultra HD video. Alternatively, the 1920 x 1080 HD format at 240 fps is best for sports broadcast or special effects support where clear slow motion playback is vital. Its native 4512 x 3008 resolution is available up to 50 fps.

Key features include the following:
  • Programmable low-power 12-bit digitization and ≥18-bit digital signal processing
  • Fast transition between still capture and multiple video modes
  • Still capture (pseudo-global shutter) and sensor reset easily configurable for mechanical shutters
  • Automatic on-chip digital correction, including Black Clamp for real-time maintenance of black level, Column FPN suppression, and line-noise suppression


PR Newswire: AltaSens also introduces 4K camera module for commercial sale: the 4K Pro RGB. The camera module is based on the new sensor and generates 4K through HD video at multiple optical formats and frame rates. The high-end module can be used for broadcast, movie and TV production, scientific instruments, medical imaging, and UAVs to record video and capture stills.

PR Newswire: There is also a monochrome night vision 4K low-light camera module: the 4K Pro Night-Vision. The intensified unit is the first commercially available low-light, ultra-high-resolution camera module. Its video engine generates multiple formats at high frame rates for resolute security, surveillance, life sciences, robotics, and astronomy applications.
9:31 PM

Applied Materials Helps to Improve Yield at LFoundry Avezzano Fab

...
Applied Materials publishes a case study on how its team helps to improve image sensor process at LFoundry Avezano, Italy fab. One of the stories talks about excessive leakage current due to improper oxide spacer etch step.

"The FabVantage team determined the root cause of the problem to be a recipe with low oxide-to-polysilicon sensitivity, which sometimes led to over-etching into the silicon substrate. Further complicating the matter, this overetching was not uniform across the tool’s chambers. Applied and the customer identified an optimized recipe as the best solution (see figure 1). It was also determined that the chamber lid temperature set point varied from chamber to chamber, which caused nonuniform etching across chambers. In addition, sensor trace analysis and Applied’s best known methods (BKMs) were used to optimize the etch process to eliminate voltage spikes that are known to lead to yield loss."

A recipe with low oxide-to-polysilicon sensitivity sometimes led to over-etching into the silicon substrate (figure 1a left). A new recipe eliminated the problem (figure 1a right). The graph compares the oxide-to-polysilicon sensitivity of several of Applied’s proposed recipe changes with the customer’s original recipe (figure 1b).
1:44 PM

Toshiba Starts Mass Production of HDR VGA Sensor

...
Business Wire: Toshiba announces that it will start mass production of TCM3211PB (formerly announced as TCM5114PB), a 1/4 inch VGA/60fps image sensor for surveillance cameras and drive recorders, at the end of April. The new sensor uses 5.6µm pixels for improved low light sensitivity. The sensor incorporates a single frame HDR function based on interleaved rows with different exposure:

10:59 PM

Tessera to License MEMS AF Patents to O-Film

...
Business Wire: Tessera signes a non-binding letter of intent (LOI) with Shenzhen, China O-Film Tech Co. for the sale of certain patents and equipment assets related to Tessera’s wholly-owned subsidiary DigitalOptics Corporation (“DOC”). In addition, the LOI contemplates a patent license agreement related to MEMS and camera module technology, as well as a license agreement related to certain software features of Tessera’s FotoNation business. The LOI also contemplates that O-Film will assume or sublease DigitalOptics’ facility lease in Arcadia, California. Additionally, both Tessera and O-Film are working towards establishing a long-term collaborative relationship between the two companies.

"This transaction with O-Film will enable us to continue to focus on our core competencies in IP licensing and imaging and we are pleased to have identified such a high-quality partner as O-Film for these valuable imaging assets," said Thomas Lacey, Tessera CEO. "O-Film is a leading developer of optical components and digital cameras in China. We are hopeful that a final agreement can be reached, and look forward to working with O-Film in the future."

The total consideration for this transaction is $50M. O-Film made an initial deposit of $5M in connection with the signing of the LOI, which will be credited towards the total consideration. The balance of $45M is to be paid upon closing of the transaction. O-Film will pay the purchase price with its cash at hand.

Thanks to SF for forwarding me the news!
2:17 PM

HTC One (M8) Duo Camera Review and Explanations

...
TrustedReviews.com was able to get a hold on the new HTC One (M8) smartphone and posted its depth-enabled camera reviews. First, how its bokeh effect works, from First Impressions review:

"to really understand what it is capable of, we need to know how the camera works. One basic point is that HTC One M8 camera is not like a Lytro camera, which simultaneously captures multiple points of focus. Instead, the actual photo taken in imaging terms is pretty conventional. The phone just knows where in the scene objects are so that it can manually blur everything but select items. It’s not really a case of re-focusing, but de-focusing."

"Unlike ‘real’ shallow depth of field effects, the transition between ‘in focus’ and ‘blurred’ is not very smooth, and we noticed some issues with the edges of in-focus objects. Even in high-contrast borders between background and foreground, there was some muddling of the focus. We also saw some areas of images belligerently staying in focus when they were meant to be blurred out. This may have been down to reflections confusing the HTC One M8 camera."

Then, TrustedReviews publishes a more detailed review of the camera blurring capabilities and artifacts:

"With the uFocus mode engaged, we see a distinct defocussing of the background. However, there are several weird inconsistencies. There's a flower to the left of the monster's head that has been judged by the camera's algorithm as being in the foreground (it wasn't), and there's a halo of 'crispiness' around the subject. This is where the M8 hasn't been able to judge the edges of the monster accurately" - see the picture below:

1:34 PM

Dual Aperture Announces its DSP SoC Partner

...
PR Newswire: Half a year ago, Dual Aperture has announced its partnership with Siliconfile (SK Hynix) to make a customized image sensor. Now the company announces its DSP partner - eWBM Co., to be designing a processing SoC to run Dual Aperture's image capture, refocusing, 3D image generation, depth estimation and gesture tracking algorithms.

Dual Aperture's image sensor technology is based on 4-color sensor design. The 4-color sensor is comprised of RGB and IR pixels. The sensor also uses separate apertures for RGB and IR pixels, thereby capturing data for two distinct images - one each in the RGB and the IR spectrums with varying sharpness, as shown in its patent application here.

The company's Vimeo video demos Dual Aperture's gesture control:



From the company's FAQ:

Q8. What are the advantages of DA approach vs. other gesture tracking devices like Kinect or Leap Motion?

Kinect and Leap Motion systems require multiple sensors with elaborate LED lighting sources. The Dual Aperture system requires only a single sensor using ambient light sources, which make it possible to implement gesture tracking in small form factor cameras, e.g. mobile device cameras. The DA system also works under direct, bright sunlight (unlike Kinect) and captures high quality color images (like conventional cameras).

Q12. Are there any cost advantages or disadvantages compared to other similar multi-utility cameras?

The Dual Aperture camera has lower manufacturing costs when compared to other similar depth measurement technologies that require additional sensors, special infrared light sources, and complex computing for image alignment.

Q16. Is the DA sensor available?

Yes. A 3.2M pixel mobile sensor sample is currently available. Other resolution sensors are currently under development and will be made available in 2014.
12:11 PM

How to Measure MTF, Part 2

...
Albert Theuwissen continues his MTF measurement series. The second part talks about the lens F-number affecting the sensor's MTF.
1:53 PM

HTC One (M8) Duo Camera Features Depth Mapping

...
HTC has announced a Duo Camera in its new One (M8) smartphone. The camera is said to be able to capture a depth information, as stated in the company's official video:



The main 4MP, 2um "Ultrapixel" sensor appears to be identical to the previous generation One smartphone (Youtube link):

1:45 PM

Reuters on Sony Image Sensor Business

...
Reuters publishes an article talking on Sony image sensor business excessive dependence on smartphone market. So far, everything looks perfect:
  • Sony expects its sales of imaging sensor chips to jump 16 percent to 360 billion yen ($3.52 billion) in the year ending this month.
  • "Some smartphone makers are upgrading their front-facing cameras for users who want sharper self-portraits, and that has opened up a whole new market for Sony," said Yutaka Okamoto, president of the company's device division. "Several fast-growing Chinese smartphone makers, keen to move upmarket, are also beginning to put in orders for Sony's high-spec chips. Sony has calculated that capacity at its existing factories would be unable to keep up with demand by mid-2015, even with a drop in demand for compact camera sensors."
  • Macquarie Capital Securities director of research Damian Thong estimates the sensor business earns an operating margin of 10% to 15%. Sony says its global market share for smartphone image sensors is at 44 percent, mainly in the back-facing cameras used to snap photos.
  • Chinese smartphones from fast-growing manufacturers such as Xiaomi tout high-end, made-in-Japan parts as a selling point
But there are some signs for the changes in future:
  • Sony's device business is increasingly tied to the smartphone market.
  • Okamoto plays down worries that smartphone growth might peak out within the next few years, citing a number of other promising markets for image sensors. "Our hope is that wearables are next. We also expect to see increasing demand for sensors used in medical devices, autos, and in agriculture," he said.
  • Sony faces a rising threat from Samsung Electronics. Samsung's newest flagship smartphone, the Galaxy S5, is due to be fitted with a Samsung's own image sensor, with Sony no longer the main supplier. "The fact that Samsung makes their own products on their own line with their own technology, that's a threat," Okamoto said.
12:55 PM

Ex-Omnivision Engineers Found Image Sensor Startup

...
A group of engineers from Omnivision has founded Cista System Corp., based in San Jose, CA. The founding group is Zheng (Wilson) Du (former Module Development Manager at Omnivision), Jiangtao Pang (former director of Product Design at Omnivision), Guangbin Zhang (former Analog Design Manager at Omnivision). The new company has raised $5M in round A at the end of 2013 and joined MIPI Alliance with the adopter status.

It's not clear what the new company is working on, but Guangbin Zhang's LinkedIn page says that he has "invented new sensor readout structure with 5 pending patents. More fundamental innovations are on the way."
12:55 PM

Hamamatsu Proposes ToF Sensor with Potential Adjusting Nodes

...
Hamamatsu patent application US20140071429 "Range sensor and range image sensor" by Mitsuhito Mase and Takashi Suzuki proposes to use circular transfer gates 5 and potential adjusting gates 6 to maximize a fill factor of ToF sensor. Basically, the whole area outside of transfer gate 5 generates photoelectrons:

2:10 PM

Amazon's Smartphone Rumored to Have 6 Camera Modules

...
Tech-On quotes KGI Securities Investment Advisory (Taiwan) analyst Ming-Chi Kuo predicting that the long rumored Amazon's "smartphone will come with six camera modules, four of which will be used for gesture-based control and other user interfaces (UIs) that detect the user's motions. Kuo considers that the cost for procuring the camera modules is US$40-50 per phone."

Amazon's smartphone cameras, as predicted by
KGI Securities Investment Advisory

BGR partially confirms the story through its own sources. The phone is expected to be available in Q2 2014.
7:05 AM

Sony Announces 20MP/25fps CMOS Sensor

...
Sony announces 1/2.3-inch IMX147LQT CMOS sensor featuring 1.2um BSI pixels. The sensor is aimed to consumer DSCs and camcorders and supports a wide choice of 4K and 2K video modes in 1/3.2-inch crop mode, including 4K/60fps/10b one, and also a 240fps high speed video:


The new 1.2um pixel has approx. 14% higher saturation signals compared with the previous generation pixels, enabling low ISO setting equivalent to ISO 80. Sony also says that it introduces a new technology for color crosstalk reduction, so that the new pixel has "about half of the color mixture in the neighboring pixel compared to the existing product IMX118CQT (1.26 µm unit pixel, Type 1/2.3, 18.47M effective pixels":


In full pixel scan mode at 22fps with 12b A/D conversion, the sensor consumes 416mW, while in 1080p60 mode the power is 311mW.
10:27 PM

Oppo Smartphone Snaps 50MP Pictures

...
Engadget has had a chance to test Oppo Find 7 smartphone camera - a high end smartphone long rumored to feature 50MP sensor. In fact, it is built around 13MP Sony IMX214 sensor, but has an interesting feature: "50-megapixel "Super Zoom" creation: the camera takes 10 consecutive shots extremely quickly, and then it automatically picks four best shots to combine them into a 50-megapixel still. Our 8,160 x 6,120 sample shots ended up being around 10MB large each, and as you can see [below], there's a lot of detail preserved even up close, which puts the Xperia Z1's 20-megapixel camera to shame." Engadget's test pictures seem to support the claim:


Although it's hard to tell for sure, but it looks like Oppo has licensed Almalence Super Zoom technology. There is a comparison of Almalence Superresolution Zoom with Sony Clear Image Zoom and an article on its implementation in Huawei phones.
1:26 PM

Research In China Updates its Camera Module Market Report

...
Research in China has updated its "Global and China CMOS Camera Module Industry Report, 2013". Few quotes:

"Without taking DSC into account, CMOS camera modules generate the output value of about USD13 billion in 2013, up 28.7% from 2012. The output value is expected to hit USD15.9 billion in 2014, representing a year-on-year increase of 22.3%, mainly because of the adding of higher pixels and more complex features such as OIS."

"Mid-size and luxury cars are sold well in China, which makes the automotive CCM market become the most potential market. For example, KIA's K9 uses five sets of CCM. The automotive CCM shipment totaled 24,946,000 sets in 2012 and will grow by 56.4% year on year to 39,008,000 sets in 2013. The shipment is expected to maintain rapid growth, reaching 59,632,000 sets with the increase of 52.9% in 2014. The automotive CCM market is dominated by Panasonic, Sony, Magna, Valeo, MCNEX, Gentex, Fujitsu, Continetal and Autoliv."

"As for the lens field, Largan ranks first, far ahead of the second follower. Largan almost monopolizes the beyond-8-megapixel lens market. Its gross margin and operating margin jump from 2012 and the revenue is approaching USD1 billion. The revenue of the second-ranked GSEO falls to less than USD350 million in 2013."

12:32 PM

Gpixel and TowerJazz Announce 150MP/10fps Sensor

...
Business Wire: TowerJazzand and Gpixel, a custom IC design house in China, announce the release of Gpixel’s world’s highest resolution CMOS image sensor using TowerJazz’s TS18IS technology. Gpixel’s 150MP GMAX3005 sensor targets medical, industrial and scientific markets. The new sensor from Gpixel and additional products expected to be released this year will answer the growing demand in China for high end image sensors.

"We believe that an intelligent imaging system is essential for all future smart ICs. The core of such an imaging system is a high performance, robust, reliable and integrated image sensor. We chose TowerJazz’s CMOS image sensor manufacturing process due to its excellent pixel performance, stitching technology for wafer scale die size, and its outstanding pixel and process customization capabilities," said Dr. Xinyang Wang, Founder & CEO, Gpixel, "We believe China is on its way to become the biggest market in the world for high-end image sensor products and TowerJazz, as our strategic partner, is critical to our success."

"We are pleased Gpixel is starting the production ramp of their high resolution image sensor and we are confident they will grow rapidly to address China’s rising demand in the high end CMOS image sensor market," said Dr. Avi Strum, VP and GM of TowerJazz CMOS Image Sensor Business Unit. "Gpixel’s GMAX3005 was a first time success due to Gpixel’s design engineers’ very high skills and knowledge of CIS design. We believe Gpixel is the most interesting and promising CIS company in China today."

Gpixel’s GMAX3005 is a monochrome image sensor with 150MP 5.5um-sized active pixels, and is capable of running at 10fps at full resolution with higher frame rates achieved in row-windowing mode. This “wafer-scale” sensor has an 167.6mm x 30.1mm chip size including 165mm x 27.5mm photon-sensitive area having 30,000×5,000 pixel array. GMAX3005 has 16-bit on-chip ADC with 12-bit ENOB, and 120 LVDS output pairs running at 200Mbps. The sensor consumes less than 2.5W at full frame rate in full resolution. GMAX3005 reaches a noise level of less than 4e-, a dynamic range of 75.4dB, and over 70% quantum efficiency at 550nm wavelength. GMAX3005 has a dark current as low as 10e-/s/pixel at 32ºC, which makes long exposure possible even without active cooling.

Click to get 1:1 scale

About Gpixel, Inc.
Gpixel Inc. is a Chinese company specialized in providing high-end customized and off-the-shelf CMOS image sensor solutions for industrial, medical, and scientific applications. The company was founded in 2013 by experienced CMOS image sensor designers and semiconductor physicists. In less than two years, Gpixel has filed more than 10 patent applications, covering from global shutter pixel, HDR pixel, low power and high speed ADCs. Gpixel products focus on extremely high resolution (over 100MP), very low noise (<2e-), high DR (>100dB) and ultra-high speed (>2Gpix/s) image sensor applications.

Update: According to LinkedIn records, Gpixel Founder and CEO Xinyang Wang is also a professor at Chinese Academy of Science. He used to work on image sensor design for On Semi and CMOSIS in Belgium from 2008 to 2012.
12:52 PM

The Ethics of Patents: Patrolling the Patent Trolls

...

As most engineers know, the U. S. patent system is intended to protect the inventor's rights in an invention.  A patent holder has exclusive rights to make, sell, or license an invention for a limited period of time (currently 20 years).  This is a compromise between two extremes:  the free-for-all extreme in which no patent law exists and anyone who can figure out an invention can copy it and make it without incurring development costs, and the perpetual-monopoly extreme in which patents would last forever and nobody else could ever make the invention. 

Most compromises need adjusting as circumstances change, and patent law is no exception.  According to U. S. Senator John Cornyn of Texas, one of the worst current problems in patent law is the growing number of so-called "patent trolls."  Who qualifies as a patent troll?  It probably depends on who you ask.  If you ask someone at Apple Computer, which is named as the defendant in more cases filed by patent trolls than any other U. S. firm, Apple will probably tell you that a patent troll is a person or organization that acquires a patent solely for the purpose of suing a deep-pocketed firm such as Apple. 

For that matter, any patent is nothing more than a license to sue.  This is because, at least in the U. S., patent infringement is a violation of civil law, not criminal law.  But with full-blown patent infringement cases complete with a jury costing upwards of $1 million, and current laws that allow the plaintiff to conceal the details of the accusations until later in the legal process, the defendant named in a patent troll's lawsuit usually has only two choices:  (1)  call the plaintiff's bluff and go to trial, knowing you might lose, and even if you win it will cost you a megabuck or more, or (2) settle out of court without seeing the details, and write off the six-figure settlement expense as just a cost of doing business. 

Of course, patent trolls may view the situation differently.  Some legitimate inventors do not have the financial backing to found a company in competition with one of the big boys, and patent litigation may be their only hope of profiting from their invention.  But if an individual or group clearly has no intention of making or using the patented item, and is formed for the sole purpose of pursuing patent litigation based on dubious claims, you can be fairly sure you are dealing with a patent troll.

Sen. Cornyn's proposed changes would move the law in what he thinks is a fairer direction.  For the first time, plaintiffs (i. e. patent trolls) would have to reveal their accusations up front in enough detail so that the entity being sued could make an informed decision as to the likelihood that a full-scale lawsuit would succeed.  With this and other changes, the hope is that frivolous and baseless patent suits that amount to little more than legalized blackmail would disappear from court dockets, while leaving the more substantial cases in place. 

Like any change in the law, the proposed legislation may have unintended consequences.  But to find out what they are, we'd first have to pass it into law.  Somewhat surprisingly, the ideas behind the Republican Sen. Cornyn's proposal have been endorsed by President Obama, and Cornyn cites the U. S. Senate as the main roadblock, which under the control of the Democratic Party has so far not acted on the legislation.  We have noted the sclerotic state of Congress elsewhere, and will simply express here the hope that the Senate will do the right thing and pass Sen. Cornyn's legislation, if it will do as much good as he says it will.

One advantage to doing a blog for a long time (we observed our eight-year anniversary a couple of weeks ago) is that you can note long-term trends, and call for changes, and actually see them happen after a while, sometimes.  Back in 2006, the first year of this blog, I discussed a patent issue not entirely unlike the current one of patent trolls:  the situation of "submarine patents."  Until 2000, the content of a patent filing was a deep secret between the person who filed the patent application and the U. S. Patent and Trademark Office.  The secret was revealed to the public at the end of the process, only after the patent was issued, so some inventors became skilled in intentionally delaying the granting of a patent in order to keep it secret until its contents became something valuable.  Then, the patent submariner would allow the patent to issue and try to sue the pants off some large firm that was profiting from a technology at least remotely related to the now-surfaced patent. 

According to Wikipedia, one of the most skilled practitioners of this art was an independent inventor by the name of Jerome H. Lemelson.  Lemelson was without question a clever and legitimate inventor, who clearly began his career as a fruitful developer of original ideas which he licensed to various firms, mostly in the areas of machine vision.  But as time went on, he developed habits which his critics began to describe as filing for submarine patents, although Lemelson always denied the accusations.  He also became very wealthy, and after his death his estate contributed to the formation of the Lemelson Foundation with the purpose of encouraging invention and innovation by individuals.  The Foundation's National Collegiate Inventors and Innovators Alliance (NCIIA) sponsors competitions and grants to teams of college students and faculty members interested in developing inventions, and has no doubt done a lot toward encouraging such activities over the years since Lemelson's death in 1997.  As Lemelson no doubt intended, any bad memories or ill will created by his patent litigation activities during his lifetime are fading in the light of the good his money is doing after his passing.

As it happened, when I wrote about submarine patents in 2006, they were already passing from the scene, because in 2000 the Patent Office began revealing the contents of most applications no longer than eighteen months after filing.  So it is no longer possible to do the submarine-patent dodge today, at least in the U. S. 

If he were still around, Lemelson might not like the tone of Sen. Cornyn's proposed changes to patent law.  Lemelson always sided with the underdog in a patent fight, and anything that would tend to make the independent inventor's lawsuits harder to prosecute against major firms is something he would probably oppose.  But law is inherently a balancing act, and if the U. S. Senate sees fit to pass the anti-patent-troll legislation, maybe in another eight years I can look back and see how well it did what it was supposed to do.  But don't hold your breath.

Sources:  Sen. John Cornyn's editorial "It's time to stop patent abuse with bipartisan Senate support" appeared in the Mar. 15, 2014 edition of the Austin American-Statesman.  I referred to Wikipedia articles on Jerome H. Lemelson, submarine patents, patent trolls, and the term of U. S. patents.  The NCIIA website is nciia.org.

Automatic Fluid Dispenser || Electronics and Telecommunication project

...
Abstract--Liquid dispenser machine is commonly found in our daily life in different places like offices, bus stands, railway stations, petrol pumps. In this thesis we are going to present a GUI (graphical user interface) operated liquid dispenser machine. Using a GUI , we can effectively increase operator accuracy, reduce training time and improve overall efficiencies, thus keeping cost down a properly designed GUI can improve overall accuracy. Present liquid dispenser machine available in industries are costly, complex and hard in design and fabrication. Main requirement from this machine is its metering or measuring quality. Accuracy of measuring is very less in various machine. Hence, the basic theme behind this research is to improve these disadvantages of liquid dispenser machine. By surveying the present machines and comparing their present limitations, new model will be fabricated so that designs data can be obtained to formulate experimental data based model for this process. The design of model will be so simple that it can be



adopted easily by small industries. Easy technology will help to reduce metering problem. The present work reports the design and fabrication of liquid dispenser machine which is used in color and pharmaceutical industry.

CONTACT US FOR THIS PROJECT


CFA Architectures Review

...
Vision Systems Design published a brief review of the recent attempts to improve on Bayer CFA:

(a) Bayer CFA classic,
(b) Truesense's RGB+White pattern (wrongly shown above as RB-W),
(c) Aptina uses Clear pixels instead of Green,
(d) Fujifilm's X-Trans CFA increases the randomness of the pixel arrangement to 6 x 6 sets,
(e) Panasonic proposes a method that replaces these color filters with inorganic color splitters.
5:47 AM

Google Project Tango Spec Revealed

...
DPReview, Myce.com noticed the Tango cameras spec shown on one of Google Chromium pages:

"Project Tango "is a 5” phone containing customized hardware and software designed to track the full 3D motion of the device, while simultaneously creating a map of the environment."

It contains several special cameras/ranging sensors:
- a standard 4MP colour backside camera.
- a Fish eye (180 degrees Field of View FOV) camera.
- a depth camera 320x180@5Hz.
- a front camera with a 120 degree FOV (similar to the human eye FOV).
"

4:29 AM

Altera Shows Stereo Camera-Based Depth Measurements

...
Altera demos its IP for depth measurements based on a stereo camera and its Cyclone IV series FPGA. The WVGA camera has 60deg FOV, 10cm stereo base and provides depth measurement with 10% accuracy at 5m, at 60fps speed, using just 11K gates:

1:30 PM

CONFERENCE CERTIFICATE || NATIONAL AND INTERNATIONAL CONFERENCE CERTIFICATES ||

...
Each year lot of  Conferences are held for undergraduate students and post graduate students in several colleges to present their new ideas in engineering .They  present their papers in technical symposiums and conferences which adds an additional qualification in their resume and their career.

Here in projecttitles4free.com we help students to do projects for the idea they have. we also help them to present their project papers in national and international conference

contact us for conference certificates of reputed colleges. send us the title , name of the authors and college name.

conference certificates with and without proceedinds...

mail to educations360@gmail.com

Advanced Design Considerations for Best-in-Class Scotch Yoke Actuators

...
Evaluating the design features of a Best-in-Class scotch-yoke pneumatic actuator, for example the Rotex Controls DRS.

Actuator Modularity

Actuator spring modules and pneumatic modules should be able to removed, swapped, rebuilt, or reinstalled on the frame module without disassembling the frame module. No need even to remove top cover of frame module, because all bolting for removal of the modules is external.

Actuators should be easily changed in the field from fail close to fail open by just swapping the positions of the spring and pneumatic modules. No need to dismantle the frame cover or cylinder assembly.

Actuators should be able to be modified from double acting to spring return easily in the field by adding a spring module.

Springs

Springs should be lifetime lubricated and epoxy coated.

Springs should be pre-compressed inside their welded spring modules for safety and ease of use.
Pneumatic cylinders should be lined with hard chrome plating. Smooth to eliminate wear of piston seals, the surface is very hard, for long life.

Inside the pneumatic module, dual oversized tie rods should be protected from external corrosion. Where the tie rods pass through the piston head, design should include a slide bearing. This bearing is important to help maintain alignment and assure smooth operation.

Frame Module

Inside the frame module, the yoke should be supported by life time lubricated bearings. Needle roller bearings ensure the most efficient torque transmission.

The actuator should include extra heavy duty travel adjustment bolts allow for +/- 10% adjustment of the 90 degree stroke. The area of contact is large, to withstand the impact forces.

The yoke thrust pin should be made of case hardened steel to resist wear.

The piston shaft should be supported on each side of the frame module by solid bearings that ensures proper alignment and smooth operation.

Flexijoint

Each piston shaft should be equipped with two Flexijoints. These specially designed joints compensate for movement and changes in alignment to reduce internal stresses and increase output torque.

The thrust transmitted through the Flexijoints ensures no side thrust on the cylinder walls and bearings.

Unique Sealing Features

Piston seal should be an X design. Flexibility of the sealing material reduces friction, prevents leakage, and extends actuator life. The X shaped seal is wear compensating, and the unique shape of the seal retains the grease for longer periods. The piston should be guided by a PTFE thrust bearing, which helps keep the piston centered, and seal wear to a minimum.

The tie rod seal should also be X design. Old fashioned O-rings should be replaced by these flexible, low friction, resilient seals to reduce the failure rate of tie rod seals. Also reduces the wear and tear to the tie rods themselves.

Standard O-ring of the shaft seal should be replaces. In this position, a proven V-seal design should be provided. This self-energized, wear compensating seal guarantees low hysteresis and minimum friction. Like the X seal of the piston and tie rod seals, the inherent shape of the V-seal helps keep the grease where it needs to be. 

Optional Hydraulic Override

Advanced design scotch-yoke actuators should have optional hydraulic override, or the override may be retrofitted to an existing actuator.

The override is fitted into the spring cartridge, to keep the overall dimensions of the actuator and override to a minimum. It should be able to withstand up to 2,000 psi hydraulic pressure. 

Apple Strengthens its Camera Group

...
DPReview, AppleInsider noticed that "the number of open positions in Apple's camera engineering group has risen dramatically in recent weeks. Apple advertised 9 openings in February and has added at least 15 more just 12 days into March, with a majority located at the company's Cupertino, Calif. corporate headquarters."
2:28 AM

HTC New Ultrapixel Camera

...
HTC published a new generation Ultrapixel camera teaser in this Youtube video:

)

GSM Arena: Meanwhile the leaked ad from Australian carrier Telstra says that the all-new HTC One will have Duo camera allowing 3D effects, background softening and selecting a focus point:

12:15 PM

PDMS Design System Administrator- WorleyParsons Oman

...


Job Title: PDMS Design System Administrator
Job Type Full-time Advertising Category Engineering/Design & Sciences Location of Job Muscat, MA OM (Primary)
Job Description

Job Title                   : Design System Administrator -PDMS

Department                  : Engineering & Operations Information Management

Reports to                  : Engineering Data Lead

Position description –

SETi Business

...
Information about SETi (Seoul Electronics and Telecom - imaging) is quite scarse in English-speaking Internet. The company is publicly traded at KOSDAQ and regularly files quarterly reports. The Nov, 2013 report is the latest published and has a plenty of information about the company's business (automatic translation):

"Our competitive advantage is in process technology and design company specializing in Fabless despite mass production to the highest quality and support. Commercialization of the technology we hold Shared Pixel technology is designed as a manufacturer of domestic design development completed in 2006 and was the first mass-produced in 2007, succeeded. Shared Pixel Pixel in units of some of the elements that are common to multiple Pixel to the common use of the remaining area and optical efficiency can increase as the technology used to place the device, this structure enables Pixel unit between the physical / electrical symmetry Pixel differences between the characteristics of the two broken occur Sensor Chip, which results in a performance drop to their unique company specializing in the design process that does not use technology that is difficult to introduce.

(C) the ability to respond to market quality products
Our flagship product is a 300,000 up to 2 million pixels CMOS products (VGA level) and the Taiwan handset market direction of mainly low-cost laptops to be targeting a Web Cam. The increase in demand for high-resolution product compared megapixel technology to ensure the design of the product and the roadmap to gradually expand the high-resolution product available. In addition to excellent image quality in order to meet customer demands for HD (High Definition) video HD Pixel structure which can cope with the successful development of the mass production, and applied to smart phones as a camera sensor for a non-conventional manner parallel Interface , Serial (MIPI) Interface type of product development. further, the image sensor is not normal for taking additional special features, such as image sensors and special purpose planning to develop high value-added products.
"


The presentation is supported by many market size data from June 2011 TSR report:

1:31 PM