Latest Jot Pixel Paper

...
Open-access IEEE Journal of the Electron Devices Society publishes an early-access paper "A Pump-gate Jot Device with High Conversion Gain for a Quanta Image Sensor" by Jiaju Ma and Eric Fossum. The new jot sensor uses BSI pixel with charge stored under TG:


A special precaution has been made to reduce the FD capacitance by spacing it away from TG and making RST gate of trapezoidal shape:


The simulated CG of the jot is 380uV/e for a 1.4um pixel in 65nm process (FD capacitance of 0.4fF). The work was sponsored by Rambus.
12:27 PM

Vishay Acquires Capella Microsystems

...
Yahoo: Vishay Intertechnology acquired all of the remaining outstanding shares of Taiwan based Capella Microsystems for approximately NT$668.2 million or US$21.0 million. Vishay initially acquired 88.95% of Capella’s shares in September 2014 for the aggregate price approximately NT$6.05 billion (approximately US$201.2 million).

Capella is a manufacturer various light, proximity, and color sensors, including gesture control sensors. In the past, the company has tried to enter CMOS sensors market with no success, apparently.
10:54 AM

Image Sensor in Every Bullet

...
PR Newswire: SmartRounds Technology, LLC "SRT" of Brighton, Colorado announces a 18mm non-impact, non-lethal smart bullets, initially be available in two versions: a ShockRound and a PepperRound. Each one is equipped with an image that turns ON the round is fired, and activate the round milliseconds before impact. A Youtube video explains how it works:


1:13 PM

Incompetent Engineers: Marilynne Robinson and the Global Economy

...

Marilynne Robinson is a historically-minded writer of fiction and essays.  In one essay entitled "Family" she decries the damage wrought by the fact that the "marketplace gods," as she calls them, are now in ultimate charge of the global economy.  The result, she says, is a return of Social Darwinism—the nineteenth-century idea that prosperity and success are rewards for the intelligent, the industrious, and the able, and poverty and failure are equally just rewards for the stupid, the lazy, and the incompetent.  The Social Darwinism of the 1800s led straight to eugenics, which acquired a bad reputation after the Nazi regime embraced it during World War II.  But in the ruthless international competition that currently prevails, she sees a return to the bad old days when a small, fantastically wealthy elite ruled over millions of industrial workers enslaved in unremitting toil.

So far, so conventional.  But toward the end of the essay, she takes an unexpected turn:
"Maybe the great drag on us all is not the welfare mother but the incompetent engineer . . . . When our great auto industry nearly collapsed, an elite of designers and marketing experts were surely to blame.  But the thousands thrown out of work by their errors were seen as the real problem." 

Robinson is good at questioning unspoken assumptions that most of us are so used to, we don't even realize they are there.  The assumption she challenges in this essay is that global competition is inevitable, and every industrialized nation must organize its institutions, including its educational system, governmental policies, and even its cultures and family structures, to succeed in the constant worldwide race to produce the most goods and services at the lowest prices.  And rather than simply deploring the way things are, she suggests that the problem may lie in a place we haven't looked—within the very elites we usually assume are the answer to the problem.

Robinson is right that the U. S. auto industry went through a steep decline in the 1980s.  The main reason for that decline was surging competition by Japanese automakers, who adapted many techniques developed in the U. S. for lean manufacturing and outran their former teachers.  To the extent that U. S. automotive engineers and managers got lazy and let things slide, she is absolutely right.  It took another decade for U. S. automakers to learn the hard lessons that Japanese competition taught them, but by 2000 the global shares of auto sales by U. S. and Japanese makers were about even.  Now that many Japanese firms have U. S. factories, the problem is not so clean-cut, but that specific incident has been taken care of. 

Both Japan and the U. S. now have China to worry about instead.  The effect of the globalized economy on the U. S. is an erosion of time available for family and family life.  Instead of one person in a family earning a living wage that suffices for a spouse and children, Robinson cites the many workers today who "patch together a living out of two or three part-time jobs, or work overtime as an employer's hedge against new hiring." 

What if Robinson's "incompetent engineers" had been competent, and had beaten the Japanese at their own game sooner?  Because the largest single expense in manufacturing tends to be labor, if the U. S. makers had quickly adopted the productivity-raising automation technologies that were such a large factor in making Japan more competitive, probably the U. S. workers who eventually lost manufacturing jobs later would have simply lost them sooner.  Clearly, what Robinson is calling for is not just competence in a narrow technical sense, but a larger vision of what purposes engineers serve, and what forms of life are encouraged or discouraged by engineering activities.

What would have to change for society to become less dominated by the ruthlessness of international competition and more hospitable to things Robinson says she misses:  "humor, pleasure, and charm; courage, dignity, and graciousness; loyalty, respect, and good faith"? 

Engineers tend to think in terms of systems, and when asked a question about a large system, the engineering answer tends to be framed in the same terms of system-wide changes.  Some would look toward legal and regulatory solutions:  protective tariffs, restrictions on immigration, widespread unionization, and other changes historically associated with left-wing politics.  But people are not machines, and the kind of scientific approach that models cows as spheres for the purpose of analysis, and models entire populations as a bunch of numbers in a database somewhere, is the kind of thinking that has gotten us into this situation in the first place.

Besides the direct influence of elites through the powers they hold, elites also teach by example.  Civic, industry, and government leaders of earlier eras attempted to maintain public appearances that were consistent with good character and citizenship—things like charm, courage, dignity, graciousness, loyalty, and good faith.  They sometimes failed to show these traits of character in private, or occasionally in public, but the journalists of the day recognized the need to preserve the illusion of rectitude in many cases and refrained from plastering every famous citizen's misdeeds all over the countryside.  Scandals were reported, but they were rare enough to be scandalous.  By contrast, scandalous behavior in everything from sexual morality to profiteering appears to be the norm for many public figures today, at least judging by media coverage.

I don't know clearly how to express what I'm asking for.  Perhaps the essence of it is a reform of character starting with the individual, and a recognition that all the regulatory changes in the world will not reform an individual who has no example of good character and rectitude to look up to and to consider imitating.  If we want an economy in which family breadwinners are paid a living wage for a work schedule that leaves enough time to families to be families, and not just strangers sharing the same living quarters, we all have to value that way of life—have to value it more than just that additional dollar we use to buy that additional consumer item.  All of us, high and low, rich and poor, engineers and janitors, will have to undergo a radical change.  And then we will have to re-learn the democratic process of moving our society toward the vision laid out by people who see it better than most of us do—people like Marilynne Robinson. 

Sources:  Marilynne Robinson's book of essays and speeches The Death of Adam was published in 2005 by Picador.  I also referred to the Wikipedia article on the automotive industry.

IEEE BIO instrumentation Project titles || Free Bio- Instrumentation IEEE base paper

...
1.)Continuous Monitoring of electro desk in Impedance Mismatch During Bioelectric Recordings
2.) Automatic System to Test Semiautomatic External Defibrillators
3.) System to measure laughing
4.) The lie detector
5.) Low energy defibrillation method
6.) Non-Invasive diagnosis of urinary bladder outlet obstruction
7.) Dry electrodes for multiple biosignals recordings
8.) Ventilator patient monitor
9.) Continuous patient monitoring in anaesthesia using head-mounted displays
10.) Development of a paediatric flow sensor for sleep investigation
11.) Auscultatory monitoring system
12.) Blood pressure monitor
13.) Continuous Blood Pressure Monitoring using Pulse Wave Transit Time
14.) Electronic blood pressure and pulse rate calculator with optional temperature indicator, timer and memory
15.) Cuffless Blood Pressure Monitoring Using Hydrostatic Pressure Changes
16.) Device, system & method for vital signs monitoring
17.) Continuous, non invasive technique for measuring blood pressure using impedance plethysmography
18.) Physiological signal monitoring system
19.) Device for neuro-stimulation
20.) Reconfigurable Intelligent Sensors for Health Monitoring
21.) Guidance of a wheelchair using electro-oculography
22.) A portable near infrared spectroscopy system for bedside monitoring of newborn brain
23.) System for long-term measurement of cerebral blood flow and tissue oxygenation on newborn infants by infrared transillumination
24.) Artificial sleep inducer
25.) Control and communication for physically disabled people, based on vestigial signals from the body
26.) A microcomputer keyboard substitute for the disabled
27.) Eye movement control of computer functions
28.) An electro-oculogram based system for communication and control using target position variation
29.) Instrumentation for ENG and EMG recording in FES system
30.) Textile-Embedded Sensors for Wearable Physiological Monitoring Systems
31.) Functional Electrical Stimulation (FES) with Smart Textile Electrodes
32.) Capacitive non-woven fabric sensors for respiration monitoring
33.) Detection of airway obstruction and sleep apnea by analyzing the phase relation of respiration movement signals
34.) Automated breath detection on long-duration signals using feed forward back propagation artificial neural networks
35.) Wearable Forehead Pulse Oximetry
36.) Extracting Heart Rate Variability from a Wearable Reflectance Pulse Oximeter
37.) Artifact-Resistant Power-Efficient Design of Finger-Ring Plethysmographic Sensors
38.) Biomimetic sound localization
39.) Hearing aid simulator
40.) FPGA-based Sleep Apnea Screening Device for Home Monitoring
41.) Epileptic Seizure Detection/Prediction/Local?Ization
42.) Wireless Heart Rate meter (cardiotachograph)
43.) Electronic stethoscope
44.) Microcomputer-based system for data acquisition and analysis of oxygen uptake studies
45.) Wrist Proprioception Testing System
46.) Non-invasive, In-vivo Monitoring of Blood Glucose Using Near Infrared spectroscopic Techniques
47.) Design of urinary bladder pressure detection device
48.) Automatic examination systems for vestibulo-ocular reflex function test
49.) Rapid Eye Movement Detection of the Newborn using neural networks
50.) Early Diagnosis of choloruquine Toxicity on Human Visual Systam Using Electroculogram (EOG)
51.) Electro-Oculography Mouse for Amyotrophic Lateral Sclerosis Patients
52.) Automatic detection of nausea using biosignals during immerging in a virtual reality
Environment
53.) Integrating Psychophysiological Measures of Cognitive Workload and Eye Movements to Detect Strategy Shifts
54.) Thinking state monitoring using plural physiological signals
55.) System for Assisted Mobility Using Eye Movements Based on Electrooculography
56.) Multisensor Data Fusion and Control for Complex Neural Interface System of biosignals
57.) The Human-Based Multisensor Fusion Method for Artificial Nose and Tongue Sensor Data
58.) Multisensor Fusion far Atrial and Ventricular Activity Detection in Coronary Care Monitoring
59.) Wireless Head Cap for EOG and Facial EMG Measurements
60.) Wearable Wireless Biopotential Measurement Device
67.) Early detection of drowsiness using a neuro-fuzzy detector / A drowsy driver detection system for heavy vehicles
68.) Evaluation of Driver Stress Using Biomarker in Motor-vehicle Driving Simulator
69.) Hand-held monitor of sympathetic nervous system using salivary amylase activity and driver fatigue assessment
70.) Vibration stimulus of seat belt motor retractor for keeping drivers awake / Safety drivingsystem Based on Monitoring Eye Movements / Drowsiness Detection Using Spectrum Analysis Of Eye Movements And Effective Stimuli To Keep Drivers Awake
71.) Full-Time Wearable Headphone-Type Gaze Detector
72.) Automatic detection of slow wave sleep using two channel electrooculography
73.) Computer based sleep recording and analysis
74.) ECG, EOG detection from helmet based system
75.) Designing a Wearable Pulse Oximeter for Military Applications
76.) Stress Monitoring Using a Distributed Wireless Intelligent Sensor System
77.) Device to monitor retinal ischemia
78.) A tissue impedance measurement chip for myocardial ischemia detection
79.) System and method for detecting the onset of an obstructive sleep apnea event
80.) An visual display stethoscope for use in the auscultation of body sounds
81.) Plantar foot pressure measurement system to monitor and display pressure distribution at the sole of the feet of a diabetic patient having foot ulcer
82.) Personal computer control of electrochemical detectors utilized for mitochondrial studies
83.) OPTICAL SENSORS FOR HEART- AND RESPIRATORY RATE MEASUREMENTS
84.) Measurements of Heart Motion using Accelerometers
85.) Respiration-movement-based? Sleep apnea monitor
86.) TEMPERATURE MEASUREMENT IN PAGET’S DISEASE OF BONE
87.) Molecular & cellular studies using oral insulin delivery systems
88.) Expert System to Support the Diagnosis of Thyroid nodules
89.) MRI compatible infusion pump
90.) A portable patient training device for lung cancer treatment
91.) Eye drop device
92.) Eye movement measurement in MRI
93.) Multi-IV fluid feed system
94.) Portable computer-aided drug dispenser
95.) Automatic Metered Dose Inhalant (MDI) delivery device
96.) Tongue pressure sensor system
97.) Development of an exhaled breath condensate system for use during exercise
98.) Design of Epilepsy monitor
99.) An instrument of sound and visual creation driven by biological signals
100.) Prediction of Tumor Existence in the Virtual Soft Tissue by Using Tactile Tumor Detector
101.) A computerized Infusion Pump for control of tissue tracer concentration during Positron Emission Tomography in vivo Pharmacokinetic/Pharmacody?Namic measurements
102.) Biomedical electrode noise measurement system
103.) Wearable EDA (Electro-Dermal Activity) Sensor Gloves using Conducting Fabric and Embedded system
104.) Wrist Ambulatory Monitoring System and Smart Glove for Real Time Emotional, Sensorial and Physiological Analysis




IEEE 2014- 2015 Ns2 Project titles

...

·        RBTP: Low-Power Mobile Discovery Protocol through Recursive Binary Time Partitioning
·        A Study on False Channel Condition Reporting Attacks in Wireless Networks
·        Snapshot and Continuous Data Collection in Probabilistic Wireless Sensor Networks
·        Autonomous Mobile Mesh Networks
·        ALBA-R: Load-Balancing Geographic Routing Around Connectivity Holes in Wireless Sensor Networks
·        STARS: A Statistical Traffic Pattern Discovery System for MANETs
·        Neighbor Table Based Shortcut Tree Routing in ZigBee Wireless Networks
·        Secure and Efficient Data Transmission for Cluster- Based Wireless Sensor Networks
·        An Energy-Balanced Routing Method Based on Forward-Aware

  • Distributed Deployment Algorithms for Improved Coverage in a Network of Wireless Mobile Sensors

2014- 2015 MATLAB Project Titles || Free IEEE MATLAB project titles and base paper

...


·        Scene Text Recognition in Mobile Applications by Character Descriptor and Structure Configuration
·        Reversible Data Hiding In Encrypted Images By Reserving Room Before Encryption
·        Phase-Based Binarization of Ancient Document Images: Model and Applications
·        Fingerprint Compression Based on Sparse Representation
·        Low-Rank Neighbor Embedding for Single Image Super-Resolution
·        BRINT: Binary Rotation Invariant and Noise Tolerant Texture Classification
·        An Efficient Parallel Approach for Sclera Vein Recognition
·        BRINT: Binary Rotation Invariant and Noise Tolerant Texture Classification

·         Digital Image Sharing by Diverse Image Media Mining Weakly Labeled Web Facial images for Search- Based Face Annotation

2014- 2015 final year Android project titles || Free android projects base paper

...


1.     Effective risk communication for android apps
2.     Reversible data hiding in encrypted images by reserving room before encryption
3.     Catch me if you can- evaluating android anti- malware against transformation attacks
4.     Faved! Biometrics: tell me which image you like
5.     How long to wait predicting bus arrival time with mobile phone based participatory sensing
6.     Smartdc: mobility prediction-based adaptive duty cycling for everyday location monitoring
7.     Moses supporting and enforcing security profiles on smartphones
8.     Generating risk summary risk scores for mobile applications
9.     Delta++ reducing the size of android application updates

10.                   Hiding mobile crowd location privacy through collaboration.

Senior Piping Designer – Oman WorleyParsons

...
Senior Piping Designer WorleyParsons Muscat Company: WorleyParsons Primary Location : OMN-Muscat Job : Piping Schedule : Full-time Employment Type: Staff Job Level: Experienced Unposting Date : Feb 27, 2015 Reporting Manager Title: Mechanical Discipline Head Worley Parsons is the premier Engineering consultancy company in Oman, providing multi-disciplinary professional services to all

Leap Motion 3D Camera Features in Mercedes and Hyundai Concept Cars

...
Leap Motion reports that its 3D camera Meadowhawk module is used to create a gesture interface in Mercedes-Benz concept shown at CES 2015. Leap Motion technology also featured in a demo by Hyundai, as well as a standalone demo that Leap Motion team brought to the showcase. Designed to work in extreme lighting and higher temperature conditions, Meadowhawk uses specialized 720p high-frame rate image sensors and 16 high-powered infrared LEDs (only 6 are seen on the picture below). The module is designed to be embedded by OEMs:

4:24 AM

Cambridge Mechatronics OIS Reaches the Market

...
Taiwanese smartphone brand InFocus launches M530 handset, marking the debut of Cambridge Mechatronics' SMA OIS actuators to the consumer market. This follows over three years of development at Cambridge Mechatronics facilities, resulting in over 20 patents covering the design of smart metal micro actuators, precision control algorithms and drive electronics. The 13MP OIS camera is supplied by Foxconn and includes an SMA OIS actuator produced by CML's manufacturing partner Hutchinson Technology (HTI). HTI and Foxconn are said to be in full mass production of SMA OIS actuators and cameras respectively in their manufacturing facilities in the US and China.

1:34 PM

Wavelens MEMS AF Demoed with Omnivision Sensors

...
PR Newswire: OmniVision announces that it has partnered with CEA-Leti spin-off Wavelens to bring to market an MEMS AF technology instead of the dated VCM used in consumer devices today. OmniVision couples its 23.8MP OV23850 sensor with Wavelens' AF solution for flagship smartphones. Wavelens' MEMS motor principle of operation has been presented here some time ago.

Grenoble, France-based Wavelens intends to implement autofocus, image stabilization, and zoom with its MEMS actuators. So far, only AF motors are shown at the company's web site:

1:23 PM

Power system Training by experts

...

Dear Sir/Madam,
                             Greetings for the day, We introduce our self as an Expert from grid power and energy spectrum and committed to deliver the services and projects for current and future needs.Now we have Organized power system training by our experts in this field for more than 20 years. Please find the attachment for further details about our company.

.

For registration and fee Details contact

Mr. Hari S
Engineer - Service Bu
mob:(0)9677092698

2nd Generation FLIR One Camera

...
Marketwired: FLIR announces an enhanced resolution 2nd generation Lepton thermal camera core and attachments for Android or iOS devices, including iPhone 6 and iPad. FLIR's MSX technology, providing enhanced thermal images with sharp detail from visible camera for easy interpretation. The new attachment will be available globally mid-year at FLIR.com and major retail outlets.

FLIR CEO Andy Teich says in a Youtube video that the new Lepton core features 4x higher resolution than the old camera. Electronista says that the new Lepton has 180x120 resolution. The older generation Lepton used to have 80 x 60 pixel array.

10:37 AM

Drone's RealSense

...
Intel publishes a Youtube video showing yet another use case for its RealSense camera:

9:33 PM

Edge of Extinction

...
Guy McPherson
Guy McPherson is convinced that humunity will go extinct soon. Guy estimates that it will happen in 5 to 20 years time.

In the video below, Guy discusses a chain of events causing several degrees warming within a few years time, including failure of the electric grid and subsequent fall in aerosols from fossil fuel burning that now mask warming, and failure to maintain nuclear power plants cooling, causing them to melt down.

These events will cause rapid warming that will accelerate loss of the snow and sea ice in the Arctic and cause massive methane releases from the seafloor of the Arctic Ocean, both adding even further warming.

Such massive warming will result in widespread crop failure and loss of habitat for humans over a timespan of up to 20 years, while events could all unfold in just 5 years time.

In the video below, Guy discusses that we are on the edge of extinction, episode 1.



Feedbacks
 

Professor Peter Wadhams on albedo changes in the Arctic

Conclusion from a paper presented at the 2008 EGU conference, on background
of a frame from a video interview by Nick Breeze with Natalia Shakhova.



In the video below, episode 2, Guy describes how large releases of methane from the seafloor of the Arctic Ocean alone could end civilization, as they will cause crop failure on the Northern Hemisphere and subsequent collapse of civilization. This will in turn cause failure of the electric grid, etc., as described above. So, whatever event comes first, it will trigger the other events, resulting in several degrees Celsius warming within years and loss of habitat for humans.



The image below highlights some of the complexities associated with the necessary cuts in emissions, including the impact of aerosols that mask the full wrath of global warming by half. In 2007, the IPCC described aerosols as a negative (cooling) force equal to between -0.5 and -2.5 W m-2. In 2009, Murphy et al suggested an aerosol forcing about -1.5 W m-2, reducing the net climate forcing of the past century by about half. In 2011, Hansen et al, based mainly on analysis of Earth's energy imbalance, derived an aerosol forcing -1.6 ± 0.3 W m-2. [source] As David Spratt points out, this equates to a cooling of about 1.2°C. In other words, abrupt ending of aerosols emissions would result in a temperature rise of about 1.2°C in a matter of weeks.


In the video below, Guy McPherson further discusses the impact of aerosols.



Below, 'Edge of Extinction', episode 3, published on 15 January, 2015, featuring Guy McPherson in a fine moment of comedy! Excerpt from his presentation at Butte College, November 20, 2014, Chico, California.



Below, 'Edge of Extinction', episode 4, published on 21 January, 2015, in which Guy comments on the State of the Union address of January 20, 2015.



Below, 'Edge of Extinction', episode 5, published on 27 Jan 2015, featuring an excerpt from Guy McPherson's interview on Global Research December 12, 2014 on the stages of grief. 





Follow Guy McPherson's European Trip March/April 2015. 



American Infrared Solutions Expands

...
Optics.org, i-Micronews: American Infrared Solutions, Hudson, NH, USA, (AIRS) has announced it is to expand both its staff and laboratories at its headquarters. The company said it is increasing its sensor fabrication and high vacuum dewar processing capacity by 150% in response to growing customer demand. ”Demand had grown rapidly for AIRS high performance SWIR, MWIR and LWIR sensors in both hyperspectral and ISR missions and we are responding with increased throughput and capability. We continue to rapidly develop capabilities necessary to support a wide range of cooled infrared imaging and sensing applications,” said Dan Manitakos, President of AIRS.
1:11 PM